Do you have the same issue with your monitor? :: Hardware and Operating Systems

Alle diskussioner > Steam-fora > Hardware and Operating Systems > Trådoplysninger

Cheetah 21. dec. kl. 6:05

Do you have the same issue with your monitor?

I have a Asus Monitor, my issue is, if I boot my Computer, the Picture Quality is pretty blurry, if I turn it off then on, it is sharp, is that normal?

< >

Viser 1-9 af 9 kommentarer

wing0zero 21. dec. kl. 6:17

No, never had that on a monitor, and I own 2 ASUS monitors at the moment.

Cheetah 21. dec. kl. 6:21

Oprindeligt skrevet af wing0zero:
No, never had that on a monitor, and I own 2 ASUS monitors at the moment.

Are you using a power strip? Or is the monitor connected separately?

Schrute_Farms_B&B 21. dec. kl. 6:35

I think I might have heard that one before. At boot, the monitor might not properly sync the signal or do its auto adjust, making the image blurry. Turning it off and on forces it to resync, which fixes the sharpness.
To avoid it, you can try updating the monitor firmware, using a different cable or port (HDMI/DP), or turning the monitor on after the PC has booted.

wing0zero 21. dec. kl. 6:43

Oprindeligt skrevet af Cheetah:
Oprindeligt skrevet af wing0zero:
No, never had that on a monitor, and I own 2 ASUS monitors at the moment.
Are you using a power strip? Or is the monitor connected separately?

On a power strip, semi decent Belkin one.

Cheetah 21. dec. kl. 6:48

Oprindeligt skrevet af wing0zero:
Oprindeligt skrevet af Cheetah:
Are you using a power strip? Or is the monitor connected separately?
On a power strip, semi decent Belkin one.

Maybe it is my Brennenstuhl alu line Premium for just 15€. Do you have a Premium one?

wing0zero 21. dec. kl. 6:54

Oprindeligt skrevet af Cheetah:
Oprindeligt skrevet af wing0zero:
On a power strip, semi decent Belkin one.
Maybe it is my Brennenstuhl alu line Premium for just 15€. Do you have a Premium one?

It's ok middle of the road probably, I doubt it's the power strip, €15 is a bit for one when you can get €2 power strip.

smallcat 21. dec. kl. 6:54

Select the native resolution and the correct refresh rate in Windows display options .Disable auto scaling in the monitor settings

Sidst redigeret af smallcat; 21. dec. kl. 6:57

Bad 💀 Motha 21. dec. kl. 16:33

Oprindeligt skrevet af wing0zero:
Oprindeligt skrevet af Cheetah:
Are you using a power strip? Or is the monitor connected separately?
On a power strip, semi decent Belkin one.

Why do you bring this up?

Every consumer PC and multiple Monitors would be fine ran through a $5 power strip 24/7 for many years. These strips shouldn't hurt anything or change how power is distributed in any ways.